 |
We
offer an unrivalled selection of top quality products from leading
brands including: AWZ, ENZO, DOTZ, LEAGUE and MANGELS.
The highest standards of manufacture ensure that the brilliant
styling that turns heads your way will not let you down in the
performance stakes either.
The wheels are designed to be easy to clean and maintain meaning
you get more time to enjoy the driving but with the wheels looking
good.
Quality
All wheels spares offer are produced to the highest standards
using only the finest alloy. The chrome finishes and polished rims
are the best around.
Sizes and Fittings
We list the wheels in inches (diameter and width).
Citroen wheel fittings are not always standard sizes. The bolt
patterns and offsets are often different from ‘standard’ models.
It can be a bit difficult working out which wheel can fit on particular
models when using various catalogues. We have done the hard work
for you. Just select your model from the list above and you will
be taken straight to the page where you can order the right set
for your model with confidence and really make a difference.
Wheel & Tyre packages
Citispares also offer all Alloy Wheels as fitted wheel/tyre packages.
Delivered fully fitted and balanced, we major on Avon, Uniroyal,
Falken and Silverstone. We can also source any make upon customer
request. Please e-mail for details.
Other Products
Lowering Springs: For a sports like drive
and a sleek lowered look spares can provide a wide selection
of lowering Springs especially designed for Citroen cars.
Just click on the ‘Lowering Springs’ panel on our front
page.
Anodised Alloy Wheel Nut/Valve sets: Inspired
by Japanese GT racers these sets add the finishing touch to any ‘COMBAT’ conversion.
Available in Normal, Bulge, and Slim fit tuning versions. Each
set contains 4 wheel nuts and 1 valve. Available sizes: 12M1.5,
and 12M1.25 thread pitches.
Locking Wheel Nuts and Bolts: We can
supply TUV approved locking wheel nuts and bolts suitable for most
of the wheels we sell. Available in single key and twin key configurations.
We also offer McGard Wheel Lock Nut and Wheel Lock Bolt sets.
Safety
Before fitting tyres on all wheels check:
1) Wheels are correct stud fitting for the vehicle and any relevant
fasteners or locating rings are correct in relation both to vehicle
and wheel.
2) Check wheel on vehicle and to ensure it clears brake and suspension
parts and rotates freely on both front and rear hubs.
3) When fastened to the hub, make sure that no part of the wheel
can make contact with the brake drums or callipers; or any other
part of the steering or suspension.
4) Check nut/bolt location seating is correct and that the threads
are rust free, and not over lubricated.
5) Where possible always use the adhesive type of balance weight,
as these help to avoid scratching of the wheel finish.
6) Carry out a visual 'lock to lock' check to ensure full bodywork
clearance.
IMPORTANT NOTE
Do not take risks - Wheel security is vital, check with us if you
have any doubts. |